|
P19 | | T-Jet Armature | Double Ended Armature Truing Tool with (3) Disks | $6 |
X20 | | T-Jet Armature | Disks For Truing Tool Includes (3) each of 400/600/1200 | $2 |
|
P12-1 | | T-Jet Body | Body Post Drilling Set 1-72 Screws Includes (4) Tools and (1) Bit | $22 |
P12-2 | | T-Jet Body | Body Post Drilling Set 2-56 Screws Includes (4) Tools and (1) Bit | $22 |
P12-S | | T-Jet Body | Body Post Drilling Set Stock Screws Includes (4) Tools and (1) Bit and (1) Tap | $22 |
|
P15 | | T-Jet Chassis | Tech Block - Specify Desired Width | $25 |
P16 | | T-Jet Chassis | Chassis Alignment Tool - Includes (3) Drill Blanks | $16 |
P17 | | T-Jet Chassis | Chassis Magnet Plug with Shaft | $10 |
P20 | | T-Jet Chassis | Guide Pin Holder Nut with Screw | $3 |
|
P01 | | T-Jet Gear | Pinion Gear Puller | $22 |
P02 | | T-Jet Gear | Pinion Gear Press | $22 |
P02-5 | | T-Jet Gear | Pinion Gear Press Combo - Includes P02 and P05 | $25 |
P05 | | T-Jet Gear | Drive Pinion and Driven Gear Press | $22 |
P06 | | T-Jet Gear | Gear Puller Line Up Tool - for Armature Pinion | $6 |
P08 | | T-Jet Gear | Gear Press Line Up Tool for Armature Pinion Shaft | $6 |
P13 | | T-Jet Gear | Idler and Driven Gear Drilling Tool | $25 |
|
P03 | | T-Jet Wheel Puller | Wheel and Retainer Puller - Light Duty | $22 |
P03A | | T-Jet Wheel Puller | Wheel Puller - Aircraft Aluminum | $22 |
P03H | | T-Jet Wheel Puller | Wheel and Retainer Puller - Heavy Duty | $22 |
P04 | | T-Jet Wheel Press Sleeves | Wheel Press - Includes .225 Sleeves | $25 |
P04-1 | | T-Jet Wheel Press Sleeves | Wheel Press Sleeves - .225 | $4 |
P04-2 | | T-Jet Wheel Press Sleeves | Wheel Press Sleeves - .250 | $4 |
P04-3 | | T-Jet Wheel Press Sleeves | Wheel Press Sleeves - .275 | $4 |
P04-4 | | T-Jet Wheel Press Sleeves | Wheel Press Sleeves - Set of (3) Includes .225, .250 and .275 | $9 |
P04-5 | | T-Jet Wheel Press Sleeves | Wheel Press Sleeves - for Stock Skinny Wheels | $5 |
P04-6 | | T-Jet Wheel Press Sleeves | Wheel Press Sleeves - for JW Skinny Wheels | $5 |
P07 | | T-Jet Wheels | Line Up Tools Set for .177, .225, .250 and .275 Wheels | $6 |
P10 | | T-Jet Wheels | Wheel Tools for Pushing Front End Retainers In Place | $6 |
P11 | | T-Jet Tires | Double Tire Mandrel Set - Includes .170/.188 Front and .188/.225 Rear | $22 |
P11S | | T-Jet Tires | Double Tire Mandrel - Available In .170/.188/.240 Front or .188/.225/.250/.275 Rear | $6 |
P18 | | T-Jet Wheel | Small Wheel and Gear Drilling Tool | $25 |
|
L01 | | Pro T-Jet Oil | Includes 1/2 oz. Squeeze Bottle w/Needle. NOT For Brushes | $7 |
L02 | | Pro T-Jet Oil | Includes 1/2 oz. Squeeze Bottle w/Needle. OK For Brushes | $7 |
X19-620 | | Loctite | 620 Loctite - Use On Aluminum and Brass Wheels on Smooth Axles - .02 OZ | $4 |
X19-680 | | Loctite | 680 Loctite - Use To Retain Gears - .02 OZ | $4 |
X18 | | Shrink Tubing | Super Flexible Thin Wall Heat Shring Tubing - 1/16" | $2 |